ARZEN
Menu

Sample report · MTR audit summary

Ti-6Al-4V ELI · Heat 0Y7K-2291

ASTM F136 · Ti-6Al-4V ELI · Source SHA-256 47041a01b17b · Engine arzen-engine/1.0.0

OUT OF SPEC
1 DEVIATION11 PASS1 REVIEW

Sample data. Generated by the Arzen engine from a synthetic certificate for a fictitious mill. Limits come from a draft catalog entry.

▲ Fe is 0.27 %. Limit is ≤ 0.25 % (ASTM F136).

PropertyMeasuredRequirementResultSource
Heat number
0Y7K-2291—PASSp1
Specification limits
These limits are a draft and have not been verified against the licensed edition of the standard. A PASS cannot be issued until they are.
ASTM F136 · Ti-6Al-4V ELI—REVIEW—
Carbon (C)
0.02 %≤ 0.08 %PASSp1
Aluminum (Al)
6.10 %5.50–6.50 %PASSp1
Vanadium (V)
4.00 %3.50–4.50 %PASSp1
Iron (Fe)
Fe is 0.27 %. Limit is ≤ 0.25 % (ASTM F136).
0.27 %≤ 0.25 %DEVIATION+0.02p1
Nitrogen (N)
0.01 %≤ 0.05 %PASSp1
Oxygen (O)
0.11 %≤ 0.13 %PASSp1
Hydrogen (H)
0.0045 %≤ 0.012 %PASSp1
Tensile strength
131.3 ksi (905.3 MPa)≥ 860 MPaPASSp1
Yield strength (0.2 %)
120.4 ksi (830.1 MPa)≥ 795 MPaPASSp1
Elongation
14 %≥ 10 %PASSp1
Reduction of area
38 %≥ 25 %PASSp1

What was not checked

  • Approved-mill list not configured: mill name recorded, not checked.
  • Country of melt recorded as read: USA. Not checked against any requirement.
  • Limits apply to: Bar/wire, annealed. Confirm the product form and size match the material received.

Download the PDFs

The files Arzen generates for this certificate, as your customer would receive them. Each one carries the source file's SHA-256 in the footer. Sample data, draft limits.