Industries
Aerospace & Defense
Check aluminum, titanium, nickel and steel certificates against the material specification, and hand your customer a FAIR Form 2 that points back to the source.
Why it matters
A heat-to-spec mismatch found at the customer's dock can hold the whole shipment. Arzen flags it while the material is still on your floor.
What you get
- MTR audit summary per heat
- AS9102 Form 2 layout (Professional)
- Append-only audit trail per certificate
Starter catalog for this industry
These entries are a draft we are verifying against the licensed edition of each standard. Until an entry is verified, results against it read “needs review”, never “within limits”. You can also load your own or your customer's limits.
| Specification | Material | Form | Status |
|---|---|---|---|
| ASTM B209 | 6061-T651 | Plate 0.250–0.499 in | ● DRAFT |
| AMS 4027 | 6061-T651 | Plate 0.250–0.499 in | ● DRAFT |
| ASTM B221 | 6061-T6511 | Extruded bar/shape ≥ 0.250 in | ● DRAFT |
| ASTM B209 | 7075-T651 | Plate 0.250–0.499 in | ● DRAFT |
| AMS 4045 | 7075-T651 | Plate 0.250–0.499 in | ● DRAFT |
| AMS 4037 | 2024-T351 | Plate 0.250–0.499 in | ● DRAFT |
| AMS 4050 | 7050-T7451 | Plate 1.001–2.000 in | ● DRAFT |
| AMS 4911 | Ti-6Al-4V | Sheet/plate, annealed | ● DRAFT |
| AMS 4928 | Ti-6Al-4V | Bar ≤ 2.000 in, annealed | ● DRAFT |
| AMS 5663 | Inconel 718 | Bar/forging, solution + precipitation treated | ● DRAFT |
| AMS 5643 | 17-4PH H1025 | Bar, H1025 | ● DRAFT |
| AMS 6414 | 4340 (vacuum remelted) | Bar, as supplied (chemistry only) | ● DRAFT |